Home - Sports Complex

Sport halls

Pneumatic hangars make it possible to cover sports grounds, providing absolute protection against any weather. Reinforced materials withstand extreme climatic conditions, while the modern and light hangar design provides comfort for everyone.

Design Solution

  • Pneumatic hangar is an inflatable structure made of reinforced PVC materials, consisting of forming pneumatic cylinders, end walls with doorways of pneumatic gates, connected in a single structure and covered with a prefabricated shell.
  • Each pneumatic cylinder is a half-torus design, which is automatically filled with air using an intelligent booster system. The end walls are equipped with door blocks, pneumatic gates, openings for supply and exhaust ventilation and heat-insulated channels for the chimney.
  • For staff and visitors, aluminum doors with closers on a metal frame are provided. Cargo gates open with an electric hoist, providing pass-through for machinery and equipment.
  • The pre-fabricated protective shell covers the pneumatic cylinders, providing increased wind and snow resistance, and also improves the heat-saving specifications of the structure.

Get a Quote

Sports hangars are inflatable structures for arranging a site for events or training under protection from adverse climatic conditions. In such rooms, in summer and winter, the air temperature is at a comfortable level, which is especially important during heavy physical exertion.

Features

The construction of football arenas or other structures makes it possible to play sports all year round. Large hangars can accommodate several sites inside at once, which is especially convenient if there are no conditions for winter training in the city or region.

Pneumatic structures perfectly resist both extremely low temperatures and strong gusts of wind. Heavy snowfalls are not terrible for them. All this does not affect the conditions provided to the athletes inside.

Installation on the prepared surface is carried out within 1-2 days. The dismantling takes the same amount when it is necessary to transfer the site to a new point. This is especially true when regional tournaments are held in cities where such conditions have not been created.

A light-transmitting membrane from which such buildings are made, reducing electricity costs, since there is enough natural light during the day. Auxiliary sources are used in the evening and at night.

The space is divided into zones to create a comfortable building, where there is a dining room, a bathroom, a dressing room. The quality and characteristics of these spaces are no worse than in capital construction.

One of the main advantages is that such buildings do not require a permit, as they are classified as temporary. Therefore, coordination with the local government is greatly simplified, which allows you to start work indoors much earlier than with the capital construction of buildings.

Constructive Solutions

An inflatable tent, the purchase of which is relevant for most small settlements and even areas of large cities, is an inflatable structure, the basis of which is PVC materials. Form-forming pneumatic cylinders are created from them, where air is pumped under high pressure.

This does not interfere with the installation of doors, windows or gates on the walls for the passage of large equipment or vehicles. All this is combined into a single structure, which is covered with a protective shell.

Pneumocylinders are hermetic vessels filled with air. Maintaining sufficient pressure is monitored by automatic control systems that receive information from high-precision sensors. As soon as the parameters differ from the nominal, a signal is sent to the blowers that add air, so they do not work constantly.

Backup superchargers connected to generators are also installed. This is necessary so that the structure does not fall or deform when the centralized electricity is turned off. Additional equipment that maintains comfortable conditions is “powered” from the same system.

Football Fields

Building a turnkey football arena using inflatable technology is a fairly easy task. Special hangars will reliably protect the playing space, as well as spectators in the stands, from the effects of wind or precipitation.

The final cost of such a structure directly depends on its size. If this is a hangar for a small “clearing” where they play mini-football, then the price will be minimal. A larger model is required to cover a full 11×11 pitch with dressing rooms, canteens and showers.

You can buy a football arena not only for matches, but also for the training process. So comfortable conditions are maintained all year round, which favorably affects the state of the team. In summer, the climate is maintained with the help of air conditioners, in winter – with heat guns.

Installation of the hangar is possible directly above the existing football field. You don’t have to worry about your lawn or equipment being damaged. The weight of the main material and auxiliary structures is too small for this. This property allows you to significantly reduce the cost of implementing a sports facility, because it is possible to use ready-made spaces.

Specifications

An inflatable arena for football, prices for which depend on a variety of technical characteristics, or other sports facilities are developed according to individual projects. At the first stage, the dimensions are discussed:

  1. Width – up to 40 meters. This is the maximum size for a structure without support.
  2. Height – up to 20 meters. The actual figure directly depends on the width.
  3. Length – no restrictions. The parameter depends on the number of modules and may change.

Further, experts discuss additional constructive points, including:

  1. Foundation. Most often, structures are built without it, in some situations a concrete base is used.
  2. Doors. It is important to clarify their location, number and type.
  3. Gate. Discussed separately, the maximum width is 20 meters. 

These parameters can be influenced by the customer when forming the project, but the football arena or other area.

Accessories

To buy an inflatable warehouse-hangar means to get a full set for its installation and operation. What does it include:

  • set of superchargers; packing bag;
  • repair kits;
  • stretch marks.

Frame models do not require constant pumping, since the structural elements are absolutely sealed and do not allow air to pass through. To monitor this indicator, sensors are installed that automatically activate the superchargers, if required.

Additionally, there is equipment for ventilation and heating. This allows the room to function fully, and employees to work in comfortable conditions, doing warehouse business.

Using

The type of warehouses in question is relevant because of the speed of installation. For its installation, only three actions are carried out:

  1. Extraction from the package. The awning and the main elements are removed from the bag after delivery to the installation point. The inflatable structure is straightened at the point where it will be installed.
  2. Connection of fans. To do this, they are connected to a power source, after which they literally inflate the structure.
  3. Strengthening. The inflated pneumatic structure should not fly away from the gust of air, for this it is securely fixed to the surface.

The easiest way is to install mobile structures that differ in small dimensions. They practically do not differ from larger analogues in their characteristics.

You can buy a warehouse-hangar in the company “Angarstroy”. Our company has its own production, so it will not be difficult for us to implement individual projects by creating a unique design and arranging all technological openings as the customer needs it.

Effective area

100 to 10,000 sqm

Diameter of air spring

1.5 to 4 sqm

Pumping system power

1 to 20 kw

Total weight of the pneumatic

1.8 to 100 t

Wind resistance

Up to 45 m/s

Installation time

1 to 7 days

Efficiency
Reliability
On-Time Delivery
Versatility

Inner width

10 to 100 m

Inside height

7 to 30 m

Weight of one air spring

70 to 1,550 kg

Operating temperature

-60 to +70 °C

Life of pneumatic hangars

At least 15 years

Material Used

Reinforced PVC

Specifications

Game season extension

The pneumo-framed structure is perfect for seasonal or year-round shelter of one or more sports grounds. Universal gyms allow you to close the sports ground, swimming pool, ice rink, golf course or athletic track. The structures are highly resistant to wind and heavy snowfall. Inside the building, ideal conditions are created for any sporting event or training.

Saving time and money

Our hangars do not need a foundation, which makes it possible to install them on any type of foundation, such as for example soil, sand or asphalt. Our design solution allows installing pneumatic hangars with minimal cost and much faster than any other structures in the market. The installation of large facilities always requires skilled labor and special equipment.

Simplified approvals

Our pneumatic hangars do not require a construction permit and simplify the coordination process with local authorities. When installing our buildings, you will avoid many stages of coordination and will be able to start your work much earlier. In a similar situation, the construction of a permanent building will require you a significant amount of time and money. In addition.

How we work

Our experts have been continuously working to improve our solutions. Employees of the company are always ready to provide you with information support and to assist in the installation, repair and operation of pneumatic hangars.

Design

Each hangar is designed in close cooperation with the customer and our experts: designers, engineers and analysts, who already have over a hundred projects in their portfolio.

Production

Hangars are manufactured on a production site of more than 5,000 square meters, equipped with state-of-the-art high-speed welding plants, digital milling cutters and plotters.


Packing and Delivery

Packaging options depend on the means of delivery requested by the customer. For sea, rail and freight, we use 20- and 40-foot containers.

Traning

The company’s experts visit the installation site to assist in the deployment of the hangar, share theoretical knowledge and conduct practical exercises.

Installation

Installation of an inflatable hangar does not require foundation or earthwork. It is enough to have a more or less flat terrain. A team of 12 workers can deploy a hangar in 2 or 3 days.

 After-sales service

You will be able to start using the hangar the very second after the installation. The hangar withstands strong gusts of wind, heat, cold and heavy snowfall.


Instruction
Production
Tests
recent work

Engineered for Flight. Trusted Worldwide.

Our Trusted Partners

Ready for Collaboration?

Need a hangar or mobile structure for your operations?