Mobile and pre-fabricated garages make it possible to reliably store and repair vehicles in conditions comfortable for maintenance. Moreover, pneumatic hangars are built quickly, without additional approvals and property taxes, thereby reducing the cost of maintaining machinery.
Inflatable garages are modern pneumoframe structures made of reinforced PVC materials. To obtain the desired shape, the structure is filled with air using fans that maintain a constant pressure inside the cylinders. The construction is complemented by special equipment that maintains a microclimate that is comfortable for cars and other vehicles, as well as for owners, drivers and operators. The possibilities of the material allow the use of such garages in any climatic conditions.
The main element of inflatable hangar-garages is PVC material, which protects vehicles from the effects of climatic factors. It acquires the desired shape only thanks to special pneumatic cylinders, into which air is pumped. They are absolutely tight, so it is enough to carry out the procedure only once, and then pump them up as needed.
The elements under consideration are interconnected by fasteners into a single structure, from above it is covered with a prefabricated shell. The entire system is controlled by sensors in automatic mode, which indicate to the blowers about the need to pump the structure in a certain area.
In such garages, all technological openings that are relevant for capital analogues are provided, for example, end walls with doorways where pneumatic gates are mounted, as well as windows and points for the exit of the chimney.
A special protective shell not only protects the air springs from external influences, but also protects the entire structure from UV rays, snow and wind. It also has a positive effect on the preservation of heat inside the garage.
Why the hangar-garage has recently been in high demand:
This is not a complete list of the advantages of such hangars, but these reasons are enough to make a decision to install a structure and store cars and special equipment in it.
For hangar-garages, prices depend on the configuration of the structure. There are also elements that cannot be excluded from the design. Among them:
100 to 10,000 sqm
1.5 to 4 sqm
1 to 20 kw
1.8 to 100 t
Up to 45 m/s
1 to 7 days
10 to 100 m
7 to 30 m
70 to 1,550 kg
-60 to +70 °C
At least 15 years
Reinforced PVC
Thanks to heating, ventilation and air conditioning systems, as well as uniform and bright lighting, our hangars provide comfortable, if not to say luxurious, working conditions for staff. Creating the most favorable conditions for employees affects the quality and speed of work processes.
Due to the ever-increasing demand for saving resources and the high cost of equipment, the majority of mining companies takes the control of indoor air cleanliness very seriously in order to reduce the amount of foreign materials introduced into the equipment.
Thanks to the universal modular structure, our hangars are able to host the largest models of dump trucks, excavators and other types of equipment. Pneumatic structures can have a traditional layout with one entrance gate.
There’s no more need to move your excavators, dump trucks and drilling rigs to remote repair facilities for maintenance and repairs. Instead, put your repair shop where the work is done. Thus, you will reduce downtime, idle runs, deferred repairs and maintenance, thereby increasing the life of your equipment.
Your hangar can be dismantled and installed in a new place just in a few days, which makes it possible to use the workshop to carry out maintenance at all your facilities where necessary. The compact packaging and low weight of the product reduce transportation costs, when installing the hangar.
Our mobile hangars work in locations where no other alternatives exist. Thanks to the compact packaging and low weight of the structure, our customers can deliver structures to the most remote and inaccessible places. Pneumatic hangars can be installed in seismically active areas.
Our experts have been continuously working to improve our solutions. Employees of the company are always ready to provide you with information support and to assist in the installation, repair and operation of pneumatic hangars.
Each hangar is designed in close cooperation with the customer and our experts: designers, engineers and analysts, who already have over a hundred projects in their portfolio.
Hangars are manufactured on a production site of more than 5,000 square meters, equipped with state-of-the-art high-speed welding plants, digital milling cutters and plotters.
Packaging options depend on the means of delivery requested by the customer. For sea, rail and freight, we use 20- and 40-foot containers.
The company’s experts visit the installation site to assist in the deployment of the hangar, share theoretical knowledge and conduct practical exercises.
Installation of an inflatable hangar does not require foundation or earthwork. It is enough to have a more or less flat terrain. A team of 12 workers can deploy a hangar in 2 or 3 days.
You will be able to start using the hangar the very second after the installation. The hangar withstands strong gusts of wind, heat, cold and heavy snowfall.